Remember that when you are hugging the center line on a left hand switchback, your head is well into the oncoming lane.
Showing posts with label Shit Du Keeps Knows is random ass shit. Show all posts
Showing posts with label Shit Du Keeps Knows is random ass shit. Show all posts
Friday, July 15, 2011
Kip Tip II
Seems Du Keeps is really learning a lot this trip. This one came in this evening:
Remember that when you are hugging the center line on a left hand switchback, your head is well into the oncoming lane.
Remember that when you are hugging the center line on a left hand switchback, your head is well into the oncoming lane.
Kip Tip
Du Keeps emailed this handy travel tip this morning:
When encountering buffalo on the highway, revving your engine does not scare them away, it makes them angry.
However, reading them a story before bedtime calms them into a gentle slumber.
When encountering buffalo on the highway, revving your engine does not scare them away, it makes them angry.
However, reading them a story before bedtime calms them into a gentle slumber.
Tuesday, July 12, 2011
Epic Sissy Adventure
Du Keeps is going on a road trip this week. Billy and I will catch up with him this weekend in Medora, ND. He needed a sissy bar to strap his shit to, but didn't like the look of any of the stock or aftermarket oober-modern ones out there. I said, grab some 1/2" Stainless and com'on by the garage we'll whip one up in the bender that fits just right.
Now, the bender I've got is lag bolted to the floor of the shed, a wooden shed, one layer plywood and one press board. I know, I know, but I've never had a problem bending 1/2" stainless and have done lots o sissys with it. Du Keeps shows up with 5/8" stainless cuz he's gotta be different or some shit. Ok, I say. We'll give it a go. Well two of us pushin and a little MAPP gas heat we made the first curve. Hmm a little twist, but we'll work that out later. We're about to go into the third bend when the Princess Auto Special bender lag bolts lift through the plywood. Ballz.
Now we've got choices. Finishing the 5/8 stainless sissy with a MAPP gas torch and brute force didn't seem like a good way to spend $50 worth of steel. Sooo let's tear up the floor, brace, the bender with 2x4's underneath and get back to work. Yip upgrades to the TGRS. Noowwww, where's that whiskey?
Unfortunately, once we had the plywood floor out of the way and a hole cut in the sub-floor, to slide 2x4 braces into, we discovered that the ground was right there and that we would be required to dig enough dirt out to fit the 2x4's in.
At his point I began to seriously reconsider the re-installation of the bender in the Tiny Garage (which had always been a real pain in the ass to have in an 8X12 workspace anyway)
But wait. With the floor ripped up, a hole in the sub-floor, the bender leaning against the wall and half my fucking shed on the lawn...Du Keeps still needed a sissy bar.
It was at this point that I realized an award was needed for the most epic fucking sissy bar fail ever! and so...
I present the first winner of the 2011 Sissy Award to Du Keeps. I stamped the award name and "DU" into the chrome of a classically awful "Live to Ride" piece of shit so it'll rust like a mule award should. Ride with pride, Buddy.
And you other Mules, beware, because this award is transferable and may be awarded to one of you in the future. Unless Du Keeps just falls in love with the look of a soaring eagle sissy bar and decides to keep it.
Thanks for comin by there Keeps it was an epic evening. See you on the road!
Now, the bender I've got is lag bolted to the floor of the shed, a wooden shed, one layer plywood and one press board. I know, I know, but I've never had a problem bending 1/2" stainless and have done lots o sissys with it. Du Keeps shows up with 5/8" stainless cuz he's gotta be different or some shit. Ok, I say. We'll give it a go. Well two of us pushin and a little MAPP gas heat we made the first curve. Hmm a little twist, but we'll work that out later. We're about to go into the third bend when the Princess Auto Special bender lag bolts lift through the plywood. Ballz.
Now we've got choices. Finishing the 5/8 stainless sissy with a MAPP gas torch and brute force didn't seem like a good way to spend $50 worth of steel. Sooo let's tear up the floor, brace, the bender with 2x4's underneath and get back to work. Yip upgrades to the TGRS. Noowwww, where's that whiskey?
Unfortunately, once we had the plywood floor out of the way and a hole cut in the sub-floor, to slide 2x4 braces into, we discovered that the ground was right there and that we would be required to dig enough dirt out to fit the 2x4's in.
At his point I began to seriously reconsider the re-installation of the bender in the Tiny Garage (which had always been a real pain in the ass to have in an 8X12 workspace anyway)
But wait. With the floor ripped up, a hole in the sub-floor, the bender leaning against the wall and half my fucking shed on the lawn...Du Keeps still needed a sissy bar.
It was at this point that I realized an award was needed for the most epic fucking sissy bar fail ever! and so...I present the first winner of the 2011 Sissy Award to Du Keeps. I stamped the award name and "DU" into the chrome of a classically awful "Live to Ride" piece of shit so it'll rust like a mule award should. Ride with pride, Buddy.
And you other Mules, beware, because this award is transferable and may be awarded to one of you in the future. Unless Du Keeps just falls in love with the look of a soaring eagle sissy bar and decides to keep it.Thanks for comin by there Keeps it was an epic evening. See you on the road!
Tuesday, August 31, 2010
Don't Doubt Du
Du Keeps was talking about guys mounting washers inside their straight pipes like butterfly valves to control the back pressure and I was pretty sure he was fulla shit 'til I saw this...
Subscribe to:
Posts (Atom)